Loading Paper In The Cassette - Canon Pixma MP610 Quick Start Manual

Loading Paper in the Cassette

Some types and sizes of paper are not loadable in the Cassette and requires the use of the Rear
Tray. If you intend to use only the Cassette, check for any usage restrictions in advance.
Important
If you cut plain paper to 4" x 6" / 101.6 x 152.4 mm, 5" x 7" / 127.0 x 177.8 mm, or 2.13" x 3.39" / 54.0 x
86.0 mm (credit card-size) for a trial print, it can cause paper jams.
Always load paper in portrait orientation. Loading paper in landscape orientation can cause the paper
to be jammed.
1
Pull out the Cassette from the machine.
2
Load the paper in the Cassette with the print
side facing DOWN, aligning the paper stack
against the right side of the Cassette.
Do not load higher than the Load Limit Mark (A).
3
Slide the Paper Guides (B) to fit to the loaded
paper stack.
4
Insert the Cassette into the machine.
Push the Cassette all the way into the machine.
5
Put your finger in the rounded indent of the
Paper Output Tray (C) and open it gently, and
open the Output Tray Extension (D).
6
Press the Paper Feed Switch (E) so that the
Cassette lamp (F) lights.
(F)
Loading Paper in the Cassette
(A)
(B)
(E)
(D) (C)
9