Digital Manual Search; Analogue Manual Search; Analogue Fine Tune; Clear Service List (*) - Akai ALED2205T User Manual

Digital Manual Search

In manual channel scan, the number of the multiplex
or frequency are entered manually and only that
multiplex or frequency are searched for the channels.
After selecting search type as Digital, you can enter
the multiplex or frequency number using the numeric
buttons and press OK button to search.

Analogue Manual Search

After selecting search type as analogue, you can use
" "/" " button to highlight an item and then press "
" or " " button to set an option.
Enter the channel number or frequency using the
numeric buttons. You can then press OK button
to search. When the channel is located, any new
channels that are not on the list will be stored.

Analogue Fine Tune

• Select Analogue Fine Tune from the Installation
menu by using " " or " " and OK buttons. Analogue
fi ne tune screen will be displayed. Analogue Fine
Tune feature will not be available if there are no
analogue channels, digital channels and external
sources stored.
• Press OK button to proceed. Use " " or " " button
to set Fine Tune. When fi nished, press OK button
again.

Clear Service List (*)

(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Use this setting to clear channels stored. Press " " or
" " button to select Clear Service List and then press
OK. The following OSD message will be displayed
on the screen:
Press OK to cancel. Select Yes by pressing " " or " "
button and press OK to delete all of the channels.

Managing Stations: Channel List

The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options.
• Press "MENU" button to view main menu. Select
Channel List item by using " " or " " button. Press
OK to view menu contents.
Select Edit Channel List to manage all stored
channels. Use " " or " " and OK buttons to select
Edit Channel List.

Operating the Channel List

• Press " " or " " button to select the channel that
will be processed. Press " " or " " button to select
a function on Channel List menu.
• Use P+/P- buttons to move page up or down.
• Press BLUE button to view fi ltering options.
• Press "MENU" button to exit.

Moving a Channel

• First select the desired channel. Select Move option
in the channel list and press OK button.
• Edit Number screen will be displayed. Enter the
desired channel number by using the numeric
buttons on the remote control. If there is a previously
English - 56 -