Features And Benefits - Rinnai REU-KM3237FFUD-E Installation And User Manual

Continuous flow water heater
Hide thumbs Also See for REU-KM3237FFUD-E:
Table of Contents

Advertisement

FEATURES AND BENEFITS

Congratulations on purchasing the Technologically Advanced, Temperature Controlled,
Rinnai Hot Water System.
Rinnai water heaters will NEVER RUN OUT of hot water. As long as electricity,
water, and gas supplies are connected, hot water is available when hot water taps are
open.
Built into the main micro-processor is the facility to LIMIT THE MAXIMUM
TEMPERATURE of the hot water supplied. The water temperature may be set to
various temperatures. This is particularly useful when the hot water unit is installed
where young children or the infirm may be using the hot water. If required, the
temperature can be changed via the dip switches on the PCB or with a localised
controller. For further information, please contact Rinnai.
Rinnai Infinity water heaters are powered flue appliances. This makes them
COMPACT, saving both floor and wall space.
The temperature of outgoing hot water is CONSTANTLY MONITORED by a BUILT-
IN SENSOR. If the temperature of the outgoing hot water rises to more than 3°C
above the selected temperature the burner is shut OFF and only turned ON again
when the temperature falls to below the selected temperature.
The burner lights automatically when the hot water tap is opened, and extinguishes
when the tap is closed. IGNITION IS ELECTRONIC, so there is no pilot light. When
the hot water tap is off, no gas is used.
The Infinity Condensing 32i / HDC1500i and Condensing 32e / HDC1500e have a
built in Status Monitor on the front of the unit to display error codes and run
condition. Up to four external temperature controllers can be mounted remotely from
the heater. This offers the following additional features:
Localised temperature setting.
Diagnostic information.
Error Codes.
Clock
Bath fill
'Deluxe' Temperature Controllers are an optional extra. These provide functions
including Bath Fill, Voice Prompt, and Clock Setting.
Temperatures selected at the controllers are retained in the SYSTEM MEMORY
Operating NOISE LEVEL IS VERY LOW.
ERROR MESSAGES ARE DISPLAYED on the Temperature Controllers, assisting
with service.
FROST PROTECTION device built in as standard.
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Reu-km3237wd-eReu-km3237ffudhd-eReu-km3237wdhd-e

Table of Contents