1. Manuals
  2. Brands
  3. CEN-TECH Manuals
  4. Laser Level
  5. 96959
  6. Set up and operating instructions manual

CEN-TECH 96959 Set Up And Operating Instructions Manual

Self level laser with multi-beams
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
self level laser
set up and Operating instructiOns
this self level laser may be used with a tripod (not included).
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
distributed exclusively by harbor freight tools
visit our website at: http://www.harborfreight.com
read this material before using this product.
failure to do so can result in serious injury.
save this manual.
©
Copyright
2007 by Harbor Freight Tools
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
for technical questions or replacement parts, please call 1-800-444-3353.
multi-beams
with
model
3491 Mission Oaks Blvd., Camarillo, CA 93011
96959
®
. All rights reserved. No portion of this
®
.

Advertisement

Table of Contents
loading

Related Manuals for CEN-TECH 96959

Summary of Contents for CEN-TECH 96959

  • Page 1 96959 set up and Operating instructiOns this self level laser may be used with a tripod (not included). Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.

  • Page 2: Table Of Contents

    cOntents impOrtant safetY infOrmatiOn ......3 general safetY rules ..........4 specific safetY rules ..........5 specificatiOns ............. 6 unpacking ..............6 set up instructiOns ..........7 assembly ..................7 mounting ..................7 Operating instructiOns.......... 7 tool set up ..................7 general operating instructions ..........8 accuracy checking..............8 maintenance and servicing ........

  • Page 3: Important Safety Information

    save this manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number).

  • Page 4: General Safety Rules

    general safetY rules warning! read all instructions failure to follow all instructions listed below may result in serious injury. The term “tool” in all of the warnings listed below refers to your line-operated (corded) tool or battery-operated (cordless) tool. save these instructiOns work area safety Keep work area clean and well lit.

  • Page 5: Specific Safety Rules

    service Have your tool serviced only by a qualified repair person. This will ensure that the tool is maintained properly. specific safetY rules warning! to prevent serious injury and/or property damage: Position batteries in proper polarity and do not install batteries of different types, charge levels, or capacities together.

  • Page 6: Specifications

    Max. Output: 5 mW, Wavelength: 635 nm CLASS IIIa LASER PRODUCT This product complies with 21 CFR 1040.10 and 1040.11 CEN-TECH 3491 Mission Oaks Blvd., Camarillo, CA, USA, 93011 Manufacture Date: ___________________ , _________ unpacking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

  • Page 7: Set Up Instructions

    set up instructiOns read the entire impOrtant safetY infOrmatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.

  • Page 8: General Operating Instructions

    After manually adjusting the base stand of the unit, if you find that the horizontal laser is blinking, the level is out of the +/- 3° self adjust range. The level will need to be repositioned and the Supporting Feet 18 leveled again. When proprely adjusted the laser will not blink.

  • Page 9: Maintenance And Servicing

    maintenance and servicing rotate the locking device (13) to the horizontal position warning (Off) before performing any inspection, maintenance, or cleaning procedures. always make sure lasers are turned off before adjusting or changing batteries. damaged equipment can fail, causing serious personal injury.

  • Page 10: Parts List

    parts list part description Q’ty part description Q’ty Carrier Strap Support Pillar Battery Cover Locking Device Shell Base Battery Case Induction Switch Supporting Sheet Triangle Base Mechanism Fine-Tuning Device Module Supporting Foot Ring Leveling Bubble Module Switch Copper Mechanism Adjustment Buttons Module assemblY diagram SKU96959...

  • Page 11: Limited 90 Day Warranty

    limited 90 daY warrantY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents