Page 1
. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353...
CAUSE SEVERE INJURY TO THE EYE. Do not look into the beam during operation. Make certain to switch the Laser Level to “OFF” when making adjustments or changing the batteries. Laser light, when reflected off a mirror like surface can cause serious eye damage.
Page 3
When unpacking, check to make sure that the product is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
Page 4
Slide Switch (18) is in the lower position, the upper button will not project a laser beam, and the lower button will project a simple dot beam. See FIGURE 1 below. FIGURE 1 Slide Switch (18) SKU 93884 For technical questions, please call 1-800-444-3353 Operation Upper Button (12)
Page 5
Before each use, inspect the Level to make sure nothing is cracked or broken. Do not use the Level if anything is cracked or broken. Have it repaired by an authorized service technician. SKU 93884 For technical questions, please call 1-800-444-3353 Maintenance...
ING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 93884 For technical questions, please call 1-800-444-3353 Parts List Part No.
Need help?
Do you have a question about the 93884 and is the answer not in the manual?
Questions and answers