CEN-TECH 03762 Assembly & Operating Instructions

Brought to You by Augusta Flint
ASSEMBLY & OPERATING INSTRUCTIONS
THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the
owner's record below:
Model___________
Product Name: Laser Level, Picture Hanger
Dimensions: 3-3/8" W x 7-1/4" L
Operating Current: <40 MA
Line Adjustment: 90°
Included: 1 "AAA" battery
WARNING: When using product, basic safety precautions should always be followed to reduce the risk
of personal injury and damage to equipment.
Read all instructions before using this product!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use this product in damp or wet locations. Don't expose to rain.
Keep work area well lighted.
3. Store idle equipment. When not in use, products must be stored in a dry location to inhibit rust. Always
lock up products and keep out of reach of children.
4. Use the right product for the job. There are certain applications for which this product was designed. It
will do the job better and more safely at the rate for which it was intended. Do not modify this product and
do not use this product for a purpose for which it was not intended.
5. Check for damaged parts. Before using any product, any part that appears damaged should be
carefully checked to determine that it will operate properly and perform its intended function. Check for
alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition
that may affect proper operation. Any part that is damaged should be properly repaired or replaced by
a qualified technician.
#03762
Serial No._____________
Technical Specifications
Product Number:
Operating Voltage:
Laser Beam Splitter:
Level Vial:
02/03
REV 02/05
LASER LEVEL
PICTURE HANGER
03762
®
Purchase Date_____________
03762
DC 3 OV, two "AAA" Batteries
Vertical/ horizontal adjust
One 0° horizontal (green/bubble)
Page 1