CEN-TECH 03192 Assembly And Operating Instructions

Brought to You by Augusta Flint

LASER

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

artwork contained herein may be reproduced in any shape or form without the express written consent

of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

LEVEL

0 3 1 9 2

Table of Contents

Need help?

Do you have a question about the 03192 and is the answer not in the manual?

Page 1 Brought to You by Augusta Flint LASER LASER LEVEL LEVEL LASER LEVEL LASER LASER LEVEL LEVEL 0 3 1 9 2 ASSEMBLY AND OPERATING INSTRUCTIONS ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright © 2003 by Harbor Freight Tools ®...
Page 2 Disconnect power. Remove batteries from this product when not in use. Warning!! Do not stare into the laser beam. The radiation in the beam will damage your eyes. SKU 03192 Page 2...
Page 3 Do not look at the laser beam, or direct the laser beam at the eyes of another person or animal. When finished, turn the Adjusting Knob back to the furthest “up” position, to prevent the plastic casing of the Laser Level from deforming. SKU 03192 Page 3...
Page 4 Elevation difference from top to bottom pegs = 36 inches FIGURE 2 7-1/2” 44” 100’ The reading is 1/2” below what it should be, (for a 36 inch difference in elevation) which means the level reads 1/2” low at 100 feet. SKU 03192 Page 4...
Page 5 TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABIL- ITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACE- MENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACE- MENT PARTS THERETO. SKU 03192 Page 5...