Jeep 2010 WK Grand Cherokee SRT8 Owner's Manual page 303

Hide thumbs Also See for 2010 WK Grand Cherokee SRT8:
Table of Contents

Advertisement

4. Connect one end of a jumper cable to the positive
terminal of the booster battery. Connect the other end of
the same cable to the positive terminal of the discharged
battery.
WARNING!
• Do not permit vehicles to touch each other as this
could establish a ground connection and personal
injury could result.
• Do not connect the cable to the negative post of the
discharged battery. The resulting electrical spark
could cause the battery to explode and could result
in personal injury.
• During cold weather when temperatures are be-
low the freezing point, electrolyte in a discharged
battery may freeze. Do not attempt jump-starting
because the battery could rupture or explode and
cause personal injury. Battery temperature must be
brought above freezing point before attempting a
jump-start.
5. Connect the other cable, first to the negative terminal
of the booster battery and then to the engine of the
vehicle with the discharged battery. Make sure you have
a good contact on the engine.
(Continued)
6. Start the engine in the vehicle that has the booster
battery, let the engine idle a few minutes, then start the
engine in the vehicle with the discharged battery.
WHAT TO DO IN EMERGENCIES 303
WARNING! (Continued)
6

Advertisement

Table of Contents
loading

Table of Contents