To Connect To Audio Equipment With A Digital Input - JVC XV-F80BK Instructions Manual

To connect to audio equipment with a digital input

You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks to the digital input of an
amplifier, MD, etc. by using an optional digital cable (OPTICAL or COAXIAL). The digital audio signal from a disc is
directly transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by
using an optional digital cable, you can enjoy high-quality surround sound.
When you make the digital connection, we recommend also to make the analog connection, because, depending on
discs, no signal may be output from the DIGITAL OUT.
The unit
DIGITAL OUT AUDIO OUT
VIDEO
PCM / STREAM
COAXIAL OPTICAL RIGHT LEFT
S-VIDEO
White
Red
The OPTICAL jack is protected by the hinged cover.
To connect the optical cable to the jack, press the
cover with the plug and connect it to the jack inside
in the correct direction.
NOTES
• When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the "DIGITAL AUDIO OUTPUT"
setting in the "PREFERENCE 2" on-screen display correctly according to the connected audio equipment. If the "DIGITAL
AUDIO OUTPUT" is not set correctly, loud noise may be generated from speakers, causing damage to them. See "DIGITAL
AUDIO OUTPUT" on page 51.
• With the digital connection, the "COMPRESSION" settings in the "PREFERENCE 2" on-screen display are invalid. Settings for
these items must be made from the decoder.
VIDEO OUT AV COMPU LINK
COMPONENT
Y P P
B R
Coaxial digital cable
(not supplied)
Audio cable
(not supplied)
Optical digital cable
(not supplied)
Digital equipment
IN IN
White
LEFT
AUDIO
RIGHT
Red
Getting started
English
OPTICAL
DIGITAL
COAXIAL
19