Basic Playback; To Start Playback - JVC XV-F80BK Instructions Manual

Basic operations

Basic playback

Note that this section describes basic operations for playback of DVD VIDEO, Audio CD and Video CD discs. For MP3 disc
playback, see the independent chapter on and after page 46.
Basic
control
buttons

To start playback

Press 3.
or
Press a desired DISC (1 through 7) button on the front panel, or press DISC SELECT followed by a
desired numeric (1 through 7) button on the remote control unit.
By the former operation (pressing 3), the unit starts playback from the disc loaded for playback after closing the
carousel (see the previous page for details about which disc is loaded for playback).
By the latter operation (using DISC, or DISC SELECT + numeric buttons), the unit starts playback from the disc set in
the specified tray. If no disc is set in the specified tray, the unit rotates the carousel clockwise until it finds a disc for
playback.
Regardless of operations for starting playback, the unit plays all available discs sequentially until you stop playback.
With some discs, which automatically goes to the menu screen and waits for the next instruction, the unit does not
move to the next disc.
About DISC indicators (1 through 7)
Each DISC indicator shows the current status of the corresponding tray as follows.
• Illuminates if a disc is set in the corresponding tray.
• Flashes when the corresponding disc is being played back.
• Unlit if no disc is set in the corresponding tray.
NOTES
• Once a tray whose status is known by the unit becomes accessible when the carousel opens, the corresponding indicator lights
regardless of whether or not a disc is set.
• When the resume point is memorized, pressing 3 starts playback from that point instead of the beginning. See page 29.
• During playback, the display window shows the title/chapter or track number being played.
• With Video CD discs with PBC control or some DVD discs, the menu display may appear on the TV screen after starting
playback. In such a case, select an item to be played back from the menu. Otherwise, the playback cannot go forward.
For operation using a menu, see page 30.
• When a DVD disc is set in the front left tray, the unit usually starts playback automatically after closing the carousel and reading
the disc contents.
26
TV DVD
STANDBY/ON
DISC
TV DVD
SELECT
¶
3D TV/VIDEO
REPEAT PHONIC CANCEL RETURN
TV1 TV2 TV3
1 2 3
TV4 TV5 TV6
4 5 6
TV7 TV8 TV9
7 8 9
TV -/-- TV0 MUTING
10 0 +10
ANGLE SUBTITLE AUDIO VFP
PROGRESSIVE
SCAN
DIGEST - ZOOM +
STANDBY
STANDBY/ON
SELECT
3
+
CH
5
VOL VOL
- +
ENTER
∞
-
CH
REMOTE CONTROL
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 DISC 7
DVD/CD PLAYER
PROGRESSIVE
Basic control buttons
OPEN/CLOSE
EXCHANGE 0
DISC SKIP
PLAY
3
STOP PAUSE
7 8
7
4 ¢
- DISC SKIP
PLAY & EXCHANGE
DVD / VIDEO CD / CD