Makita 9921 Instruction Manual

Makita 9921 Instruction Manual

Double insulation
Hide thumbs Also See for 9921:

Advertisement

Belt Sander

MODEL 9921
MODEL 9403
I N S T R U C T I O N
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
DOUBLE
INSULATION
M A N U A L
003358

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Summary of Contents for Makita 9921

  • Page 1: Belt Sander

    Belt Sander MODEL 9921 MODEL 9403 003358 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
  • Page 2: Specifications

    8JD, ENGLAND faces. Responsible manufacturer: Power supply Makita Corporation Anjo Aichi Japan The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They...
  • Page 3: General Safety Rules

    GENERAL SAFETY RULES GEA001-3 WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.
  • Page 4: Specific Safety Rules

    19. Store idle power tools out of the reach of chil- Always use safety glasses or goggles. Ordinary dren and do not allow persons unfamiliar with eye or sun glasses are NOT safety glasses. the power tool or these instructions to operate Hold the tool firmly with both hands.
  • Page 5: Functional Description

    FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Switch action 003363 CAUTION: • Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF”...
  • Page 6 Empty the dust bag of its contents, tapping it lightly so as to remove particles adhering to the insides which might hamper further collec- tion. NOTE: • If you connect a Makita vacuum cleaner to this tool, more efficient and cleaner operations can be performed. 1. Fastener Carbon plate 003390 For greater sanding efficiency and to help the belt run cooler, install an optional carbon plate on the steel plate when sanding hardwood or steel.
  • Page 7: Replacing Carbon Brushes

    CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
  • Page 8 Makita Corporation Anjo, Aichi, Japan 884189C226...

This manual is also suitable for:

9403

Table of Contents