About This Instruction Manual - JVC XV-D721BK Instructions Manual

About this instruction manual

This instruction manual basically explains operations as follows:
The number indicates
the following procedural
step(s) in which the
button(s) is(are) used.
You may also use the
corresponding buttons
on the front panel of the
unit if available.
The number
indicates the
procedural step.
Other convenient
procedures, etc.
Additional
supplemental
remarks
To repeat a desired part [A-B REPEAT]
1
7
During playback
1
Press ON SCREEN.
The on-screen display appears on the TV screen.
Use CURSOR 5/∞ to move
2
REPEAT], then press ENTER at the beginning
of the part you want to repeat (point A).
The color of [A-B REPEAT] changes.
3
Press ENTER at the end of the part you want
to repeat (point B).
The unit locates "A" and starts repeat playback
between "A" and "B."
Point B must be in the same title or track as point A.
(for DVD Audio)
MIN SEC
TRACK 8 TIME 0 : 58 EACH
TIME SELECT
REPEAT
MIN SEC MIN SEC
A 2 9 : 2 3 B 3 0 : 0 9
A-B REPEAT
1 2 3 4 5 6 7 8 TIME SEARCH
PROGRAM
9 10 11 12 13 14 15 16
RANDOM
17 18 19 20 21 22 23 24
AUDIO
2 / 3
Point A Point B
(for Audio CD)
MIN SEC
TRACK 8 TIME 0 : 58 EACH
TIME SELECT
REPEAT
MIN SEC MIN SEC
A 2 9 : 2 3 B 3 0 : 0 9
A-B REPEAT
1 2 3 4 5 6 7 8 TIME SEARCH
PROGRAM
9 10 11 12 13 14 15 16
RANDOM
17 18 19 20 21 22 23 24
Point A Point B
• To quit A-B repeat playback
Press 7. The unit stops playback and quits A-B repeat
mode.
• During playback, pressing ENTER when
REPEAT] quits A-B repeat mode and continues playback.
NOTES
• To turn off the on-screen display
Press ON SCREEN.
• If appears when pressing ENTER in step 2 during
DVD Video playback
You cannot repeat the selected portion because of the
disc contents.
2, 3
to [A-B
(for DVD Video)
ANGLE 1 / 3
AUDIO 2 / 3
SUBTITLE
1 / 3
REPEAT
A-B REPEAT
St. End 3 1
TITLE CHAPTER
0 : 08 : 52 TIME SEARCH
0 10 Mb TIME
A 0 : 0 0 : 0 3 B 0 : 0 8 : 5 2 CHAP.SEARCH
Point A Point B
(for Video CD)
AUDIO
ST
REPEAT
A-B REPEAT
St. End 3
TRACK
35 : 22 TIME SEARCH
TIME
0 10 Mb
A 3 4 : 5 8 B 3 5 : 2 2 PBC CALL
Point A Point B
points [A-B
Introduction
These symbols
indicate the types of
discs which the
operation can be
used for.
The names of
buttons on the
remote control unit
(or on the front
panel of the unit) are
all given in
uppercase letters.
2