Table of Contents
Advertisement
8. Functional description / operating
instructions
Please read these operating instructions care-
fully so that you are familiar with, and are able to
use, all of the functions of your
Lite-Ex PL 10. For your own safety and informa-
tion please read the instructions on the following
pages carefully!
8.1 Assembly of the Lite-Ex PL 10
Lamp head
Disc
Fig. 1
8.2 Getting started
The supplied batteries must be inserted to begin
with (outside the Ex-area). In order to be able
to use the flashlight in the Ex-area it must be
ensured that the lamp head and the body of the
flashlight are screwed together tightly. The flash-
light can then be switched on by lightly rotating
the yellow ring switch clockwise.
22
Thread-forming screw for
plastic 20 x 10 T6
Belt clip
Flashlight body
LED housing
Sealing ring 22.76 x 2
Ring switch
Sealing ring 22.8 x 1.5
Advertisement
Table of Contents
