Table of Contents
Advertisement
ring is set in a groove under the protective disc).
When replacing the lamp head on the LED
housing make sure the seal and disc are seated
properly. After assembly no part of the seal
should be visible through the opening where the
beam is emitted. If the LED housing or lens has
been damaged, the flashlight should be sent to
the manufacturer for repair.
(Fig. 2)
8.7 Assembling the belt clip
Remove the belt clip from the plastic bag and
attach it to the side of the company logo using
the screw provided (see Fig. 3).
(Fig. 3)
25
Advertisement
Table of Contents
