Table of Contents
Advertisement
5.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
6.
Turn on the lights to make sure
the new bulb is working.
7.
Put the inner fender cover in place.
Install and lock each holding clip
by pushing on the center.
Replacing Rear Bulbs
1.
Drop open the tailgate.
2.
Remove the two bolts, and remove
the rear light assembly from the
rear pillar.
3.
Determine which of the three
bulbs is burned out: brake/
taillight, turn signal/hazard light,
or back-up light.
4.
Remove the socket by turning it
one-quarter turn counterclockwise.
5.
Remove the burned-out bulb by
pulling it straight out of the socket.
Lights
CONTINUED
247
Hide quick links:
Advertisement
Table of Contents
