Table of Contents
Advertisement
Playing a CD, CD Changer
The indicators above the disc
2.
buttons of the empty positions will
blink, and the green load indicator
above the CD slot comes on.
3.
Insert a CD into the CD slot.
Insert it only about halfway; the
drive will pull it in the rest of the
way. You will see ''BUSY'' in the
display. The CD load indicator
turns amber and blinks as the CD
is loaded.
You cannot load and play 3-inch
(8-cm) discs in this system.
4.
When ''LOAD'' appears again in
the display, insert the next CD into
the CD slot.
Do not try to insert a disc until
''LOAD'' appears. You could
damage the audio unit.
152
5.
Repeat this until all six positions
are loaded. The system will then
begin playing the first CD loaded.
If you stop loading CDs before all six
positions are filled, the system will
wait for 10 seconds, then stop the
load operation and begin playing the
last CD loaded.
If you press the LOAD button while
a CD is playing, the system will stop
playing that CD and start the loading
sequence. It will then play the CD
just loaded.
You can also load a CD into an empty
position while a CD is playing by
pressing the appropriate disc button.
Select an empty disc button (the
indicator above the button is off),
and press the button. The system
will stop playing the current CD and
start the loading sequence. It will
then play the CD just loaded.
On vehicles without navigation system
1.
Press and hold the LOAD button
until you hear a beep and see
''LOAD'' in the display, then
release the button.
To load only one CD, press and
release the LOAD button.
2.
On the upper right side of the
display, the disc number for an
empty position will begin blinking,
and the green CD load indicator
will come on.
Hide quick links:
Advertisement
Table of Contents
