Connecting The Powered Subwoofer; Connecting To An Analog Component; Connecting To A Digital Component; Connecting The Power Cord - JVC TH-C6 Instructions Manual

Connections
Connecting the powered
subwoofer
Center unit
System cord
(supplied)
Align the marks.
NOTE
• The way of connecting the system cord varies depending on the type
of the powered subwoofer.
Connecting to an analog
component
You can enjoy the sound of an analog component.
Center unit
S-video cord
(not supplied)
or
Composite video
cord
(not supplied)
VCR (
Cassette recorder ( )
To composite video output
To S-video output
To audio output
NOTE
• The signals input to the VIDEO jack of the VCR IN jacks will be
output only from the VIDEO jack of the VIDEO OUT jacks, not from
the S-VIDEO jack of the VIDEO OUT jacks.
13
Powered
subwoofer
or
Align the
RCA pin plug
cord
(not supplied)
or )
TV ( )
Do not connect the power cord until all other connections have been made.
Connecting to a digital
component
You can enjoy the sound of a digital component.
DBS *
MD player
marks.
* DBS = Direct Broadcasting Satellite
NOTE
• Only digital audio signals can be input when selecting "DBS" as the
source to play. (
as a DBS tuner, operate this system to listen to the sound.
Connecting the power
cord
Make sure that all other connections have been completed.
Center unit
Power cord
(Supplied)
CAUTION
• Disconnect the power cord before cleaning or moving the system.
• Do not pull on the power cord to unplug the cord. When unplugging
the cord, always grasp and pull the plug so as not to damage the cord.
Center unit
To digital optical output
tuner
Digital optical cord (not supplied)
pg. 17) When connecting a video component such
Power cord
Plug into AC outlets.
Powered
subwoofer