Windshield Wiper And Wash System - Skoda 2009 Yeti Owner's Manual

Hide thumbs Also See for 2009 Yeti:
Table of Contents

Advertisement

The vanity mirrors* in the sun visors are provided with covers. Push the cover in
A
direction of arrow
.
2
On vehicles which are equipped with double sun visor*, you can also unfold the
auxiliary visor after swivelling the sun
WARNING
The sun visors must not be swivelled to the side windows into the deploy-
ment area of the head airbags if any objects, such as ball-point pens etc. are
attached to them. This might result in injuries to the occupants if the head
airbag is deployed.

Windshield wiper and wash system

Windshield wiper
You can operate the windscreen wipers and automatic wipe/wash
using the windscreen wiper lever.
The windscreen wiper lever
Using the system
Safety
visor⇒ page 68, fig.
69.
Fig. 70 Windscreen wiper
lever
⇒ fig. 70
has the following positions:
Driving Tips
Finger-operated wiping
– If you wish to wipe the windscreen only briefly, push the lever into the
A
sprung position
. If you hold the lever in the lower position for more
4
than 1 second, the wiper wipes faster.
Intermittent wiping
– Position the lever up into position
A
– Set with the switch
the desired break between the individual wiper
A
strokes
Slow wipe
– Position the lever up into position
Fast wipe
– Position the lever up into position
Automatic wipe/wash for windscreen
– Pull the lever towards the steering wheel into sprung position
wash system sprays immediately, the windscreen wiper starts wiping
a little later. The wash system and the windscreen wiper operate
simultaneously at a speed of more than 120 km/h.
– Release the lever. The windscreen wash system stops and the wiper
continues for another 3 - 4 wiper strokes (depending on the period of
spraying of the windscreen). At a speed of more than 2 km/h, the wiper
wipes once again* 5 seconds after the last wiper stroke in order to
wipe the last drops from the windscreen. This function can be acti-
vated/deactivated by a specialist garage.
Rain sensor*
– Move the lever into position
– You can set the sensitivity of the sensor individually with switch
General Maintenance
Breakdown assistance
Lights and Visibility
A
.
1
A
.
2
A
.
3
A
.
1
Technical Data
69
A
, the
5
A
.
A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents