Inputs Aux-In* And Mdi; Cd Changer - Skoda 2009 Yeti Owner's Manual

Inputs AUX-IN* and MDI*

The input AUX-IN is located below the armrest* of the front seats and is marked

with .
The input MDI is located in the front centre console.
The inputs AUX-IN and MDI transmit audio signals from connected external audio
sources (e. g. iPod or mp3 player) and record music from these devices via your
radio* or your navigation system* installed in the factory.
The description of the operation can be found in the relevant Owner's Manual of
your radio* or your navigation*.
Note
•
The loudspeakers in the vehicle are matched to a power output of the radio and
navigation system of 4x 20°W.
•
For the equipment sound system*, the loudspeakers are matched to a power
output of the amplifier of 4x40°W + 6x20 W.

CD changer*

The CD changer for the radio and navigation system is housed on the left-
hand side of the luggage compartment.
Using the system Safety
Fig. 160 The CD changer
Driving Tips General Maintenance
Loading a CD
A
– Press on the button and insert the CD (compact disc) into the CD
A
A
case . The CD is automatically loaded onto the next free position in
B
the CD-changer. The LED in the corresponding button
flashing.
Load CDs
A
– Hold the button pressed and guide the CDs one after the other
A
(maximum 6 CDs) into the CD case
are no longer flashing.
Loading a CD to one definite position
A
– Press on the button . The LEDs in the buttons
A
memory spaces, which are already assigned and flash in the case of
free memory spaces.
A
– Touch the desired button
D
Ejecting a CD
A
– Briefly press on the button
C
memory spaces, now the LEDs light up in the buttons
– Touch the corresponding button
Ejecting all CDs
A
– Hold the button pressed for more than 2 seconds, in order to eject
C
the CDs. All CDs in the CD-changer are ejected consecutively.
Note
•
Always guide the CD into the CD-case
upwards.
•
Never push the CD with force into the CD-case as the insertion is performed
automatically.
Breakdown assistance
Communication
A
stops
D
A
. The LEDs in the buttons
B
A
light up at the
D
and guide the CD into the CD-case
, in order to eject a CD. For assigned
A
.
D
A
. The CD is ejected.
D
A
with the printed side pointing
B
Technical Data
145
A
D
A
.
B