MSI MS-7522 User Manual page 43

I/O (VT-d). For further information please refer to Intel's official website.
▶ Intel EIST
The Enhanced Intel SpeedStep technology allows you to set the performance level of
the microprocessor whether the computer is running on battery or AC power. This field
will appear after you installed the CPU which supports speedstep technology.
▶ C1E Support
To enable this item to read the CPU power consumption while idle. Not all processors
support Enhanced Halt state (C1E).
▶ Intel Turbo Boost
This item will appear when you install a CPU with Intel Turbo Boost technology. This
item is used to enable/ disable Intel Turbo Boost technology. It can scale processor
frequency higher dynamically when applications demand more performance and TDP
headroom exists. It also can deliver seamless power scalability (Dynamically scale up,
Speed-Step Down). It is the Intel newly technology within i7 CPU.
▶ Turbo Boost Tech Config
Press <Enter> to enter the sub-menu:
▶ Turbo Ratio Limit Program
This item is used to enable/ disable the turbo ratio limit program. Setting to [Enable]
activates the following fields.
▶ 1/2/3/4/5/6-Core Ratio Limit
These items allow you to select the CPU core ratio limit.
▶ TDC Limit Override
Setting to [Enable] activates the TDC Limit value field, and use the TDC Limit
value field to set the CPU TDC value.
▶ TDC Limit value (A)
This item allows you to select the CPU TDC value (ampere).
▶ TDP Limit Override
Setting to [Enable] activates the TDP Limit value field, and use the TDP Limit value
field to set the CPU TDP value.
▶ TDP Limit value (W)
This item allows you to select the CPU TDP value (watt).
▶ Adjust CPU Base Frequency (MHz)
This item allows you to set the CPU Base clock (in MHz). You may overclock the CPU
by adjusting this value. Please note the overclocking behavior is not guaranteed.
▶ Adjusted CPU Frequency (MHz)
It shows the adjusted CPU frequency. Read-only.
▶ MEMORY-Z
Press <Enter> to enter the sub-menu.
▶ DIMM1~6 Memory SPD Information
Press <Enter> to enter the sub-menu. The sub-menu displays the informations of
installed memory.
En-33