Fcc Warning - Advantage MicroTron Installation Manual

VII. Advantage Controls' Product Warranty
Manufacturer's Product Warranty
Advantage Controls warrants control systems of its manufacture to be free of defects in material or
workmanship. Liability under this policy extends for 24 months from date of installation. Liability
is limited to repair or replacement of any failed equipment or part proven defective in material or
workmanship upon manufacturer's examination. Removal and installation costs are not included
under this warranty. Manufacturer's liability shall never exceed the selling price of equipment or part
in question.
Advantage disclaims all liability for damage caused by its products by improper installation, mainte-
nance, use or attempts to operate products beyond their intended functionality, intentionally or oth-
erwise, or any unauthorized repair. Advantage is not responsible for damages, injuries or expense
incurred through the use of its products.
The above warranty is in lieu of other warranties, either expressed or implied. No agent of ours is
authorized to provide any warranty other than the above.
30 Day Billing Memo Policy
Advantage Controls maintains a unique factory exchange program to ensure uninterrupted service
with minimum downtime. If your controller malfunctions, call -800-743-743, and provide our
technician with Model and Serial Number information. If he is unable to diagnose and solve your
problem over the phone, a fully warranted replacement unit will be shipped, usually within 48 hours,
on a 30 Day Billing Memo.
This service requires a purchase order and the replacement unit will be billed at current list price for that
model less any applicable resale discount. Upon return of your old unit, credit will be issued to your
account if the unit is in warranty. If the unit is out of warranty or the damage not covered, a partial
credit will be applied based upon a prorated replacement price schedule dependent on the age of
the unit. Any exchange covers only the controller or pump. Electrodes, liquid ends and other external
accessories are not included.

FCC Warning

This equipment generates and uses radio frequency energy and if not installed and used properly, that
is, in strict accordance with the manufacturer's instruction, may cause interference to radio commu-
nications. It has been type tested and found to comply with the limits for a class A computing device
pursuant to subpart J of part 5 of FCC Rules, which are designed to provide reasonable protection
against such interference when operated in a commercial or industrial environment. Operation of
this equipment in a residential area is likely to cause interference in which case the user, at his own
expense, will be required to take whatever measures necessary to correct the interference.
5