JVC EXAD KD-AVX2 Instruction Manual page 37

Indications
IF Band Width
Area Setting
*1
SIRIUS ID
AV Input
* 1 Appears only when SIRIUS tuner is connected.
* 2 Reverse lamp wire connection is required. See Installation/Connection Manual (separate volume).
The rear view through the camera appears on the monitor in "Full" aspect ratio (regardless of the
aspect ratio setting) when you shift the gear to the reverse (R) position.
Selectable settings, [reference page]
In some areas, adjacent stations may interfere with each
other. If this interference occurs, noise may be heard.
Auto: [Initial]; Increases the tuner selectivity to reduce
interference noises between adjacent stations. (Stereo
effect may be lest.)
Wide: Subject to the interference from adjacent stations,
but sound quality will not be degraded and the stereo
effect will remain.
US: [Initial]; Select this when using the unit in
North/Central/South America. (FM: 200
kHz; AM: 10 kHz)
Europe: Select this when using the unit in any other
area than North/Central/South America.
(FM: 50 kHz—manual tuning, 100 kHz
—auto search; AM: 9 kHz)
South America: Select this when using the unit in South
America country where FM interval is 100
kHz. (FM: 100 kHz; AM: 10 kHz)
Your SIRIUS identification number appears on the monitor.
[44]
You can determine the use of LINE IN and VIDEO IN jacks.
Off :
Select when you do not need AV-Input as a source (AV-IN
is deleted from the source items).
Audio&Video:
[Initial]; Select this when connecting an AV component
such as a VCR.
Audio:
Select this when connecting an audio component such as a
cassette deck.
Camera * 2
:
Select when connecting the rear view camera.
Camera Reverse *
2
:
The mirror image of the rear view is displayed on the
monitor. (The monitor on the receiver only; the normal rear
view appears on the external monitor.)
37