Troubleshooting - JVC EXAD KD-AVX2 Instruction Manual

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
• Sound cannot be heard from the
speakers.
• The receiver does not work at all.
• Remote controller does not work.
• "No Signal" appears on the monitor.
• SSM automatic presetting does not
work.
• Static noise while listening to the
radio.
• Disc cannot be played back.
• Recordable/Rewritable discs cannot
be played back.
• Tracks on the Recordable/Rewritable
disc cannot be skipped.
• Disc cannot be recognized.
• "No Disc" appears on the monitor.
• "Not Support" appears on the
monitor.
• "Disc Error" appears on the monitor.
• "No Files" appears on the monitor.
• Sound and picture are sometimes
interrupted or distorted.
• No playback picture appears on the
monitor.
Remedies/Causes
• Adjust the volume to the optimum level.
• Check the cords and connections.
Check the cords and connections.
Reset the receiver
(see page 2).
Dual Zone is activated (see page 30).
While Dual Zone is activated, remote controller
only functions for operating the DVD/CD player.
• Change the source.
• Starts playback on the external component
connected to the VIDEO IN plug.
• Check the cords and connections.
• Signal input is too weak.
Store stations manually.
Connect the antenna firmly.
Insert the disc correctly.
• Insert a finalized disc.
• Finalize the disc with the component which you
used for recording.
Eject the disc forcibly (see page 2).
Insert the disc correctly.
Use a file format the unit supports (see page 4).
• Insert the disc correctly.
• Insert a disc recorded and finalized.
The disc does not have playable files. Insert a disc
containing playable files.
• Stop playback while driving on rough roads.
• Check the cords and connections.
Parking brake wire is not connected properly. See
Installation/Connection Manual.
59