Edit To Or From Another Video Recorder - JVC HR-XVC23U Instructions Manual

Edit To Or From
Another Video
Recorder
A
TV receiver Player
Audio/video cable
AV mode
Recorder
B
Recorder
Audio/video cable
AV mode
TV receiver
Player
Your unit
Audio/video
cable
Another recorder
Your unit
Audio/video
cable
Another recorder
You can use your unit as the source player or as the
recording deck.
Slide the TV/VCR/DVD switch to the right.
A
Make connections.
A When using your unit as the source player ...
... connect its AUDIO/VIDEO OUTPUT connectors to the
audio/video input connectors on another recorder.
B When using your unit as the recording deck ...
... connect its AUDIO/VIDEO input connectors to the
audio/video output connectors on another recorder.
B
Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
C
Set the input mode of recording deck.
With this video unit, press AUX (number key "0") and/or
CH to select "F-1".
When using another recorder as the recording deck, refer to its
instruction manual.
D
Set the edit mode.
See "PICTURE CONTROL" on page 75.
E
Engage the Record Pause mode of the
recording deck.
Locate the point where you start recording, then engage
the Record Pause mode.
F
Start the source player.
Engage the Play mode of the source player.
G
Start the recording deck.
Engage the Record mode of the recording deck.
NOTES:
All necessary cables can be obtained from your dealer.
When you select "EDIT" to dub tapes in step D, be sure to select
"NORM" after you finish dubbing the tapes.
When you use this unit as the source player for editing, be sure to set
"SUPERIMPOSE" to "OFF" before starting. (
69
EN
pg. 75)