Express Timer Programing - JVC HR-XVC23U Instructions Manual

36
EN
Express Timer
Programing
Before performing Express Timer Programing:
Make sure that the unit's built-in clock is set properly.
Insert a cassette with the safety tab in place. The unit will
come on automatically.
Turn on the TV and select the AV mode.
Slide the TV/VCR/DVD switch to the right.
OPERATIONS ON VCR DECK (cont.)
Example: To timer-record the program from 8:00 PM to
10:00 PM on 24th December, on channel 12.
A
Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
B
Access the Program screen.
Press PROG.. (If you're just
starting out, "PROGRAM 1"
appears.)
C
Enter the program start time.
Press START +/– to enter the
time you want recording to
start.
Press and hold START +/– to
move in 30-minute
increments, or press and
release repeatedly to move
1 minute at a time.
D
Enter the program stop time.
Press STOP +/– to enter the time you want recording to
stop.
Press and hold STOP +/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
E
Enter the program date.
Press DATE +/–.
The current date appears on the TV screen. The date you enter
appears in its place.