Selecting The Sound Enhancement (E.a.m.)/Setting Background/Setting Screen Saver - JVC HR-XV1EK User Manual

Selecting the sound enhancement (E.A.M.)/Setting Background/
Setting Screen Saver
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to
VCR/DVD. Then press DVD to select the DVD mode.
(The DVD indicator will light)
Selecting the sound enhancement (E.A.M.*)
You can easily switch a preferred audio enhancement.
*E.A.M.: Enhanced Audio Mode
1
Press OSD twice.
Then press B B B B B /A A A A A to
select the E.A.M.
icon, then press OK
(Enter).
The sound enhance-
ment menu appears.
2
Select the sound enhancement by pressing
Each time you press the button, the sound enhance-
ment changes.
Normal:
Normal sound.
3D:
To obtain expansive virtual surround sound
effects from just two speakers.
Dialogue:
To control critical centre channel information
to make dialogue more intelligible (only
when playing a DVD video disc recorded on
the Dolby Digital recording system).
• To use this enhancement on sounds output
from the BITSTREAM/PCM jack, be sure to
set "Audio Out Select" to "PCM." (see page 52).
To exit the audio enhancement selection Press
CANCEL.
Notes:
• Actual effects to sounds may vary depending on the speaker
system. Make selection according to your preference.
• Actual effects to sounds may vary depending on the disc.
• When the DVD/VCR is connected to an amplifier equipped
with Dolby Pro Logic Surround, select "Normal".
Otherwise, Dolby Pro Logic Surround may function
differently than usual.
• Selecting "Dialogue" disables "Dynamic Range Control"
function (see page 52).
• During MP3 playback, the sound enhancement is not
effective.
54
2 3 -0:21:28
/
Setting Background
Select the background color or background picture.
1
Press SET UP MENU
in the stop mode.
Press or
lect "Display".
2
Press or
select "Back-
ground", then press
OK (Enter). Press
or to select
your desired
background, then
press OK (Enter).
Blue: Blue background.
Gray: Gray background.
Picture: Use the picture which appears when you
turn on the DVD/VCR as a background.
Jacket: Use the jacket picture included on some
discs as a background. If it is not included,
.
a gray background will be substituted.
3
To make the SETUP screen disappear, press SET
UP MENU.
Setting Screen Saver (DVD only)
To turn the screen saver on or off.
1
Press SET UP MENU
in the stop mode.
Press or
select "Display".
2
Press or
select "Screen
Saver", then press
OK (Enter).
Press or
select "On" or "Off",
then press OK
(Enter).
Off: The screen saver is disengaged.
On: The screen saver operates in 10
minutes after you press 4 .
3
To make the SETUP screen disappear, press SET
UP MENU.
Picture
to se-
TV Shape 4:3LB
Video Out Select Video
: Select
to
Display
On-Screen Display On Blue
Background Picture Gray
Screen Saver On Picture
Jacket
: Select
Picture
to
TV Shape 4:3LB
Video Out Select Video
: Select
to
Display
On-Screen Display On Off
Background Picture On
Screen Saver On
to
: Select
: Enter
: Enter
: Enter
: Enter