Table of Contents
Advertisement
D
Set Just Clock.
The default setting is "OFF".
A Press rt to select "JUST CLOCK", then press ENTER.
B Press rt to set to the desired mode, then press
ENTER.
For the Just clock function, refer to "Just Clock" on page 104.
If you set to "OFF", you can disregard the next step as you
won't be able to receive regular clock adjustments.
E
Set the source channel position for clock
data.
The unit is preset to receive clock setting and adjustment
data from channel position 1.
A Press rt to select "TV PROGRAMME", then press
ENTER.
B Press rt to set the channel position to the number
representing the station transmitting clock setting data,
then press ENTER.
F
Start the clock operation.
Press SET UP.
NOTES:
Just Clock (when set to "ON") adjusts the unit's built-in clock
every hour, except for 23:00, 0:00, 1:00 and 2:00.
Just Clock is not effective when:
— the unit's power is on.
— the unit is in the Timer mode.
— a difference of more than 3 minutes exists between the
built-in clock's time and the actual time.
— the unit is in the Automatic Satellite Programme Recording
mode. (
pg. 63)
— the unit is in the Power Save mode. (
— "L-2 SELECT" is set to "SAT VIDEO" or "SAT S-VIDEO".
(
pg. 83)
If Just Clock is set to "ON", the unit's clock is automatically
adjusted at the start/end of Summer Time.
Just Clock may not function properly depending on the
reception condition.
105
EN
pg. 95)
Advertisement
Table of Contents
