Table of Contents
Advertisement
100
EN
D
Select the band.
A Press rt to select
"BAND", then press
ENTER.
B Press rt to change the
band between CH
(regular) and CC (cable),
then press ENTER.
E
Enter the channel.
A Press rt to select "CH", then press ENTER.
B Press rt to input the channel number you want to
store.
To enter the registered station name (
And ID List"), press rt to select "ID", then press ENTER.
Press rt.
For fine tuning adjustment, press rt to select "FINE", then
press ENTER. Press rt to perform fine-tuning.
When storing a channel that sends scrambled broadcasts,
press rt to select "DECODER", then press ENTER. Press rt
to set "DECODER" to "ON" ("OFF" is the default setting).
When "L-2 SELECT" is set to "VIDEO", "S-VIDEO", "SAT
VIDEO" or "SAT S-VIDEO", the "DECODER" setting cannot be
changed. (
pg. 83, "L-2 Select Setting (L-2 SELECT)")
F
Enter new channel information.
Press ENTER. The Confirmation screen appears.
Repeat steps C – F as necessary.
G
Close the Confirmation screen.
Press SET UP.
To change positions, see "Change Station Channel Position"
(in the right column).
If you wish to set station names other than the ones registered
in your unit, see "Set Stations (B)" (
ATTENTION:
Guide Program numbers are not set when channels are
stored manually. (
pg. 97, "S
pg. 103, "TV Station
pg. 102).
V
System Setup")
®
HOW
IEW
SUBSIDIARY SETTINGS (cont.)
Delete A Channel
Perform steps A and B of "Manual Channel Set" on page 99
to access the Confirmation screen before continuing.
A
Select the item.
Press rt w e to select the item you want to delete.
B
Delete a channel.
Press &.
The item next to the cancelled one moves up one line.
Repeat steps A and B as necessary.
C
Close the Confirmation screen.
Press SET UP.
Change Station Channel Position
Perform steps A and B of "Manual Channel Set" on page 99
to access the Confirmation screen before continuing.
A
Select the item.
Press rt w e to select the item you want to move, then
press ENTER.
B
Select the new position.
Press rt w e to select the
new channel position, then
press ENTER.
Example: If you moved the
station in position 4 to
position 2, the stations
originally in positions
2 and 3 each move
down one space.
Repeat steps A and B as necessary.
C
Close the Confirmation screen.
Press SET UP twice.
Advertisement
Table of Contents
