Table of Contents
Advertisement
For Parts Call K&T 606-678-9623 or 606-561-4983
CUSTOMER RESPONSIBILITIES
MAINTENANCE SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
Check Brake Operation
Check Tire Pressure
Check Operator Presence and
T
Interlock Systems
R
Check for Loose Fasteners
A
Sharpen/Replace Mower Blades
C
Lubrication Chart
T
Check Battery Level
0
R
Clean Battery and Terminals
Check Transaxle Cooling
Check V-Belts
Check Engine Oil Level
Change Engine Oil (with oil filter)
Change Engine Oil (without oil filter)
E
N
Clean Air Filter
G
Clean Air Screen
I
Inspect Muffler/Spark Arrester
N
Replace Oil Filter (If equipped)
E
Clean Engine Cooling Fins
Replace Spark Plug
Replace Air Filter Paper Cartridge
Replace Fuel Filter
1 - Change more often when operating under a heavy load or
in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, operator must maintain tractor
as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your tractor.
All adjustments in the Service and Adjustments section of
this manual should be checked at least once each season.
•
Once a year you should replace the spark plug, clean
or replace air filter, and check blades and belts for wear.
A new spark plug and clean air filter assure proper air-
fuel mixture and help your engine run better and last
longer.
BEFORE EACH USE
•
Check engine oil level.
•
Check brake operation.
•
Check tire pressure.
•
Check operator presence and
interlock systems for proper operation.
•
Check for loose fasteners.
3
4
1,2
2
2
➀ ➀ ➀ ➀ ➀
SPINDLE ZERK
➀ ➀ ➀ ➀ ➀
➀ ➀ ➀ ➀ ➀
➁ ➁ ➁ ➁ ➁
IMPORTANT:
POINTS WHICH HAVE SPECIAL NYLON BEARINGS.
VISCOUS LUBRICANTS WILL ATTRACT DUST AND DIRT
T H A T W I L L S H O R T E N T H E L I F E O F T H E S E L F -
LUBRICATING BEARINGS. IF YOU FEEL THEY MUST BE
LUBRICATED, USE ONLY A DRY, POWDERED GRAPHITE
TYPE LUBRICANT SPARINGLY.
16
www.mymowerparts.com
SERVICE DATES
5
1,2
1
,
2
2
2
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-free battery.
5 - Tighten front axle pivot bolt to 35 ft.-lbs. maximum.
Do not overtighten.
LUBRICATION CHART
FRONT
WHEEL
BEARING
ZERK
General Purpose Grease
Refer to Customer Responsibilities "ENGINE" Section
DO NOT OIL OR GREASE THE PIVOT
➀ ➀ ➀ ➀ ➀
SPINDLE ZERK
➀ ➀ ➀ ➀ ➀
FRONT
WHEEL
BEARING
ZERK
➁ ➁ ➁ ➁ ➁
ENGINE
Advertisement
Table of Contents
