JVC 1203-FOH-ID-VP Instructions Manual page 48

48
EN
20. The indicators and the image
color on the LCD monitor are
not clear.
21. The cassette will not load
properly.
22. The memory card cannot be
removed from the player.
23. Picture does not appear on the
LCD monitor.
24. Images on the LCD monitor
are jittery.
25. The LCD monitor has become
dirty (ex. fingerprints).
26. Time code does not appear.
27. An error indication (E01, E02
or E06) appears.
28. An error indication (E03 or
E04) appears.
29. The remote control does not
work.
20. • This may occur when the
surface or the edge of the
LCD monitor is pressed.
21. • The battery's charge is low.
22.
—
23. • The LCD monitor's brightness
setting is too dark.
24. • The speaker volume is too
great.
25.
—
26. • "TIME CODE" is set to
"OFF".
27. • A malfunction of some kind
has occurred. In this case the
player's functions become
unusable.
28. • A malfunction of some kind
has occurred. In this case the
player's functions become
unusable.
29. • "REMOTE" is set to "OFF".
• The remote control does not
point at the remote sensor.
• The remote control batteries
are exhausted.
TROUBLESHOOTING (cont.)
20.
21. • Install a fully charged battery.
( pg. 11, 12)
22. • Push in the memory card a
few more times. (
23. • Adjust the brightness of the
LCD monitor. (
24. • Turn the speaker volume
down. ( pg. 18)
25. • Wipe them gently with soft
cloth. Wiping strongly can
cause damage. (
26. • Set "TIME CODE" to "ON".
( pg. 28, 31)
27. • pg. 51.
28. • pg. 51.
29. • Set "REMOTE" to "ON".
( pg. 28, 30)
• Point at the remote sensor.
( pg. 39)
• Replace the batteries with
fresh ones. (
—
pg. 17)
pg. 14)
pg. 55)
pg. 39)