JVC TK-WD310 Instructions Manual

JVC TK-WD310 Instructions Manual

Jvc color video camera instructions
Hide thumbs Also See for TK-WD310:

Advertisement

COLOR VIDEO CAMERA
TK-WD310
For Customer Use:
Enter below the Serial No. which is
located on the body. Retain this
information for future reference.
Model No. TK-WD310
Serial No.
These are general IMPORTANT SAFEGUARDS and certain items
may not apply to all appliances.

IMPORTANT SAFEGUARDS

1. Read all of these instructions.
2. Save these instructions for later use.
3. All warnings on the product and in the operating instructions should
be adhered to.
4. Unplug this appliance system from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
5. Do not use attachments not recommended by the appliance manu-
facturer as they may cause hazards.
6. Do not use this appliance near water - for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or near
a swimming pool, etc.
7. Do not place this appliance on an unstable cart, stand, or table. The
appliance may fall, causing serious injury to a child or adult, and
serious damage to the appliance.
Use only with a cart or stand recommended by the
manufacturer, or sold with the appliance. Wall or
shelf mounting should follow the manufacturer's in-
structions, and should use a mounting kit approved
by the manufacturer. An appliance and cart combi-
nation should be moved with care.
Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to
overturn.
I
INSTRUCTIONS
(A)
LWT0181-001A-H
PORTABLE CART WARNING
(symbol provided by RETAC)
S3125A
VICTOR COMPANY OF JAPAN, LIMITED
is a registered trademark owned by VICTOR COMPANY OF JAPAN, LTD.
is a registered trademark in Japan, the U.S.A., the U.K. and other countries.
© 2004 VICTOR COMPANY OF JAPAN, LIMITED
8. Slots and openings in the cabinet and the back or bottom are pro-
vided for ventilation, and to insure reliable operation of the appli-
ance and to protect it from overheating, these openings must not be
blocked or covered. The openings should never be blocked by plac-
ing the appliance on a bed, sofa, rug, or other similar surface.
This appliance should never be placed near or over a radiator or
heat register. This appliance should not be placed in a built-in in-
stallation such as a bookcase unless proper ventilation is provided.
9. This appliance should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of
power supplied to your home, consult your dealer or local power
company. For appliance designed to operate from battery power,
refer to the operating instructions.
10. This appliance system is equipped with a 3-wire grounding type
plug (a plug having a third (grounding) pin). This plug will only fit
into a grounding-type power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet, contact your electrician
to replace your obsolete outlet. Do not defeat the safety purpose of
the grounding plug.
11. For added protection for this product during a lightning storm, or
when it is left unattended and unused for long periods of time, un-
plug it form the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning
and power-line surges.
12. Do not allow anything to rest on the power cord. Do not locate this
appliance where the cord will be abused by persons walking on it.
Printed in Thailand
LWT0181-001A-H
II

Advertisement

Table of Contents
loading

Summary of Contents for JVC TK-WD310

  • Page 1: Important Safeguards

    For Customer Use: Enter below the Serial No. which is located on the body. Retain this information for future reference. Model No. TK-WD310 Serial No. These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances. IMPORTANT SAFEGUARDS 1.
  • Page 2: Safety Precautions

    Information for USA This device complies with part 15 of the FCC Rules. Changes or modifica- tions not approved by JVC could void the user’s authority to operate the equipment. 18. When replacement parts are required, be sure the service techni- cian has used replacement parts specified by the manufacturer that have the same characteristics as the original part.
  • Page 3: Table Of Contents

    INTRODUCTION Thank you for purchasing this product. (These instrustions are for TK-WD310U and TK-WD310E.) Before beginning to operate this unit, please read the instruction manual carefully in order to make sure that the best possible per- formance is obtained. Features Backlight compensation over a wide area is realized by the 14-bit Wide Dynamic Range feature.
  • Page 4: Operating Precautions

    ● Blemishes: Small spots are normal, the camera contains compen- sation functions for blemishes above 120 mV (p-p) in value. Please contact your JVC authorised dealer for further information. ● For temperatures higher than the recommended temperature, the slow shutter may not work correctly.
  • Page 5: Connection/Installation Basic System

    INTRODUCTION Names and Operations of Parts [Rear Panel] DC12V SEE INST- AC24V RUCTION MANUAL CLASS 2 ONLY (U TYPE) ISOLATED POWER ONLY (E TYPE) SELECTOR POWER VIDEO OUT [DC 12V, AC 24V] Power input terminals To input DC 12V or AC 24V power. [VIDEO OUT] Video signal output connector This BNC connector outputs a composite video signal.
  • Page 6: Mounting The Lens

    CONNECTION/INSTALLATION Mounting the lens Mount the lens according to the procedures described below. Lens mount COLOR VIDEO CAMERA IRIS IRIS VIDEO VIDEO CONNECTION/INSTALLATION Connections on the back ● Turn off the power supply to all components before making con- nections. Power supply (DC 12 V or AC 24 V) SEE INST- DC12V...
  • Page 7: Mounting The Camera

    CONNECTION/INSTALLATION Mounting the camera Camera mounting screw hole Camera mounting bracket Rotation prevention hole When mounting the camera on a fixer, pan/tilt, etc., use the camera mounting screw hole located on the camera-mounting bracket. CAUTION: Use the screw with a length shorter than 7mm from a camera-mounting face.
  • Page 8: Back Focus Adjustment

    CONNECTION/INSTALLATION Back focus adjustment Be sure to make back-focus adjustments when changing the lens mount- ing method or using a different lens. ● To make accurate back focus adjustments, carry out adjustments in a state where the lens iris is released. To open the lens iris, set MODE in the FOCUS ADJUST menu screen to ON.
  • Page 9: Menu Tree

    MENU SETTING Menu tree The menu screens are structured as shown below. Page 27 — — — F O C U S J U ST — — — MOD E E X I T Page 28 — — — ME N U —...
  • Page 10 MENU SETTING VIDEO ADJUST screen (continued) Item Content WDR BIAS Sets the low/mid luminance level of the Wide Dynamic Range ● To brighten video with low/mid luminance: Increase the value ● To darken video with low/mid luminance: Decrease the value [Setting range: -36 ~ -8 ~ 36] WDR LIMIT Sets the maximum value of the Wide Dynamic...
  • Page 11: Manual White Balance Screen

    MANUAL WHITE BALANCE screen If the entire screen appears to be reddish or bluish in color as the result of automatic white balance adjustment, manually adjust the white bal- ance. Preparation — — — I D E O J U ST —...
  • Page 12: Factory Settings Screen

    Allowed characters direction (SELECTOR button) direction Space Pressing the SELECTOR button in the direction will select the character on the right and pressing in the direction will select the character on the left. Pressing and holding the button will continu- ously change the character selected.

Table of Contents