JVC TK-WD310U Instructions Manual
Color video camera
Hide thumbs
Also See for TK-WD310U:
- Specifications (2 pages) ,
- Instructions manual (48 pages) ,
- Comparison chart (1 page)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for JVC TK-WD310U
Summary of Contents for JVC TK-WD310U
- Page 1 COLOR VIDEO CAMERA TK-WD310 For Customer Use: Enter below the Serial No. which is located on the body. Retain this information for future reference. Model No. TK-WD310 Serial No. This instruction manual is made from 100% recycled paper. INSTRUCTIONS LWT0127-001A...
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before clean- ing. - Page 3 8. Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to insure reliable operation of the appliance and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the appliance on a bed, sofa, rug, or other similar surface.
- Page 4 12. Follow all warnings and instructions marked on the appliance. 13. Do not overload wall outlets and extension cords as this can result in fire or electric shock. 14. Never push objects of any kind into this appliance through cabi- net slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock.
- Page 5 17. When replacement parts are required, be sure the service tech- nician has used replacement parts specified by the manufac- turer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 18.
-
Page 6: Safety Precautions
(servicing) instructions in the litera- ture accompanying the appliance. Information for USA This device complies with part 15 of the FCC Rules. Changes or modifica- tions not approved by JVC could void the user’s authority to operate the equipment. CAUTION RISK OF ELECTRIC SHOCK... - Page 7 Due to design modifications, data given in this instruction book are sub- ject to possible change without prior notice. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. AVERTISSEMENT: POUR EVITER LES RISQUES D’INCENDIE OU D’ELECTRO-CUTION, L’APPAREIL A L’HUMIDITE OU A LA PLUIE.
-
Page 8: Features
INTRODUCTION Thank you for purchasing this product. (These instrustions are for TK-WD310U and TK-WD310E.) Before beginning to operate this unit, please read the instruction manual carefully in order to make sure that the best possible perfor- mance is obtained. Features Backlight compensation over a wide area is realized by the 14-bit Wide Dynamic Range feature. - Page 9 EASY INSTALLATION The factory default settings are intended to give easy instal- lation. Please attach a lens, a power supply, a video cable and mount the camera securely. You should now have good images. The additional information contained in this handbook is intended to give additional flexibility to more demanding installations.
-
Page 10: Table Of Contents
Contents INTRODUCTION Features ... 2 Contents ... 4 Operating Precautions ... 5 Names and Operations of Parts ... 8 CONNECTION/INSTALLATION Basic System ... 13 Mounting the lens ... 14 Connections on the back ... 16 Mounting the camera ... 18 Auto iris lens adjustment ... -
Page 11: Introduction
INTRODUCTION Operating Precautions To save energy, when it is not being used turn the system’s power off. This camera has been designed for indoor use. When you use it outdoors, be sure to use an appropriate housing. Do not install or use the camera in the following places. •... - Page 12 INTRODUCTION Operating Precautions (continued) The white balance (ATW) of this device is optimally set for sun- light. Proper white balance may not be achieved for artificial lighting such as fluorescent lighting, etc. If you use this camera in locations where the camera is ex- posed to fluorescent light, a slow color change may occur.
- Page 13 Blemishes: Small spots are normal, the camera contains com- pensation functions for blemishes above 120 mV (p-p) in value. Please contact your JVC authorised dealer for further informa- tion.
-
Page 14: Names And Operations Of Parts
INTRODUCTION Names and Operations of Parts [Front and Bottom] Lens mount For use with CS mount lens. (C-mount lenses require a conversion ring.) Backfocus adjustment ring Adjusting the back focus during lens installation. Please refer to “Back focus adjustment” on structions on how to adjust the back focus. - Page 15 [BF LOCK] Back focus locking screw (× 2: 2 mm) This serves to fix the back focus-adjusting ring. Camera-mounting bracket The bracket has been attached on the bottom of the camera before shipment. It can also be attached on the top according to the circumstance.
- Page 16 INTRODUCTION Names and Operations of Parts [Rear Panel] [DC 12V, AC 24V] Power input terminals To input DC 12V or AC 24V power. [VIDEO OUT] Video signal output connector This BNC connector outputs a composite video signal. Con- nect this to the video input connector of a video monitor, switcher, etc.
- Page 17 [SET] button During normal screen display, pressing and holding this button for more than 2 seconds will display the MENU screen. Page 24) During MENU screen display, this button is pressed to display or enable the selected menu item. The input digit will change when entering the camera title.
- Page 18 INTRODUCTION Names and Operations of Parts [Side Panel] [VIDEO/DC] Iris Selector Switch This should be set according to the type of lens if an automatic iris control lens is used. VIDEO : In case of lens with EE amp built-in. : In case of lens without EE amp built-in.
-
Page 19: Connection/Installation Basic System
CONNECTION/INSTALLATION Basic System System with up to 8 cameras Power Camera 1 cable COLOR VIDEO CAMERA Video signal cable Camera 2 COLOR VIDEO CAMERA Camera 8 COLOR VIDEO CAMERA AC24V or DC12V AC24V or DC12V AC24V or DC12V • • • • • • Switcher Monitor DVR, etc. -
Page 20: Mounting The Lens
CONNECTION/INSTALLATION Mounting the lens Mount the lens according to the procedures described below. Lens mount IRIS VIDEO COLOR VIDEO CAMERA IRIS VIDEO Ferrite core... - Page 21 Before mounting a lens, check whether it is CS-mount lens. Dimension (b) of the lens shown in the illustration must be as shown in the table below. If (b) exceeds the value in the table, it may damage the inside of the camera or correct mounting may be impossible;...
-
Page 22: Connections On The Back
CONNECTION/INSTALLATION Connections on the back Turn off the power supply to all components before making connections. SEE INST- RUCTION MANUAL CLASS 2 ONLY (U TYPE) ISOLATED POWER ONLY (E TYPE) POWER VIDEO OUT Video signal cable (BNC) Connect the coaxial cables (BNC) to the VIDEO OUT connec- tor (BNC). - Page 23 Power supply (DC 12 V or AC 24 V) Connect the DC 12 V or the AC 24 V power supply to the DC 12V/AC 24V terminals. To prevent connection errors or a cable disconnection, we recommend the use of lug plates for the con- nections.
-
Page 24: Mounting The Camera
CONNECTION/INSTALLATION Mounting the camera Camera mounting screw hole When mounting the camera on a fixer, pan/tilt, etc., use the cam- era mounting screw hole located on the camera-mounting bracket. CAUTION: Use the screw with a length shorter than 7mm from a camera-mounting face. Furthermore, make use of the rotation prevention hole to prevent the camera from falling and securely mount the camera. - Page 25 DC12V SEE INST- AC24V RUCTION MANUAL CLASS 2 ONLY (U TYPE) ISOLATED POWER ONLY (E TYPE) POWER VIDEO OUT Fall Prevention • Exercise maximum caution when installing the unit to the wall or ceiling. You should not engage in the installation work your- self.
-
Page 26: Auto Iris Lens Adjustment
CONNECTION/INSTALLATION Auto iris lens adjustment Connect the camera according to the connection method, turn it on, display an image on the monitor, and check the image. The white balance adjustment mode is selected. BALANCE” The camera has been factory-adjusted to the best position, but it may need to be adjusted according to the object conditions or com- bination of lenses. - Page 27 • LEVEL adjustment Monitor screen Too bright Too dark Memo If the sensitivity adjustment LEVEL is turned excessively to L, the sensitivity increases because of the AGC function of the camera, and the image looks grainy. At Low light levels, video iris lens may “Hunt”. Please adjust iris level on lens to minimise hunting.
-
Page 28: Back Focus Adjustment
CONNECTION/INSTALLATION Back focus adjustment Be sure to make back-focus adjustments when changing the lens mounting method or using a different lens. To make accurate back focus adjustments, carry out adjustments in a state where the lens iris is released. To open the lens iris, set MODE in the FOCUS ADJUST menu screen to ON. - Page 29 • With a fixed-focus lens If the focus can not be adjusted correctly by rotating the lens focus ring, adjust the back focus as follows. Loosen the back focus locking screws by turning it counter- clockwise ( Shoot a pattern closely. Turn the lens focus ring to ∞.
-
Page 30: Menu Setting Menu Settings
MENU SETTING Menu settings Cursor — — — ME N U F OCU S A D J U S T . . V I D E O A D J U S T . . C AM E R A S E T T N G S F A C T... - Page 31 — — — — — — V I D E O J U ST MO E 2 A G C L OW A T W B A L A N C E N O MA L C O L O R L E V E L N O MA L E N H A N C E L E V E L...
-
Page 32: Menu Tree
MENU SETTING Menu tree The menu screens are structured as shown below. — — — ME N U — — — F O C U S A D J U S T . . V I D E O A D J U S T . . C AM E R A S E T T N G S... -
Page 33: About Menus
About menus FOCUS ADJUST ... Used during focus adjustment of the auto VIDEO ADJUST ... Sets the wide dynamic range, gain, color CAMERA SETTINGS ... Sets the DC iris, camera title and vertical FACTORY SETTINGS ... Restores the menu settings to the fac- FOCUS ADJUST screen MODE Used during focus adjustment of the auto iris lens. -
Page 34: Video Adjust Screen
MENU SETTING VIDEO ADJUST screen WDR MODE Setting of the wide dynamic range (WDR) is performed. CUSTOM : Manually adjusts the wide dynamic range. Pressing the SET button will display the WDR CUS- TOM SETTINGS screen. ( MODE1 : When shooting in a bright area outdoors MODE2 : Standard video MODE3 : To brighten the video taken indoors MODE4 : To brighten areas with little luminance in video with... -
Page 35: Wdr Custom Settings Screen
WDR CUSTOM SETTINGS screen The Wide Dynamic Range (WDR) is adjusted manually. — — — I D E O J U ST WD R MOD E A G C MOD E WH I B A L A N C E C O L O R L E V E L E N H A N C E L E V E L... - Page 36 MENU SETTING VIDEO ADJUST screen (continued) Item WDR BIAS Sets the low/mid luminance level of the Wide Dynamic Range [Setting range: -36 ~ -8 ~ 36] WDR LIMIT Sets the maximum value of the Wide Dynamic Range [Setting range: 0 ~ 25 ~ 36] EXP.
- Page 37 AGC MODE Sets the maximum gain of AGC (Auto Gain Control). : When the AGC feature is not in use : When there is a shortage of light HIGH : When there is an extreme shortage of light SUPER : When there is a shortage of light even when setting to HIGH Memo When raising the gain, noise will appear in the screen for...
- Page 38 MENU SETTING VIDEO ADJUST screen (continued) WHITE BALANCE The white balance adjustment mode is selected. White balance can be adjusted for lighting with color temperature in the range between 2,500K and 10,000K. : The unit will be in the Auto Tracking White Balance mode. The white balance will be adjusted automatically according to the color temperature of the lighting.
-
Page 39: Manual White Balance Screen
MANUAL WHITE BALANCE screen If the entire screen appears to be reddish or bluish in color as the result of automatic white balance adjustment, manually adjust the white balance. — — — I D E O J U ST WD R MOD E A G C MOD E... -
Page 40: Camera Settings Screen
MENU SETTING VIDEO ADJUST screen (continued) COLOR LEVEL The color level of video signals is adjusted. To lighten colors: decrease the value. To darken colors: increase the value. [Setting range: -5 ~ NORMAL ~ 5] ENHANCE LEVEL The aperture control/contour level of the video signals is adjusted. Soften video: decrease the value. - Page 41 Item DC OFFSET Standard level (brightness) for controlling the DC auto iris operation is set. Increasing the value: the screen will become darker [Setting range: 100 ~ 120 ~ 150] Memo Depending on the lens, hunching may occur when setting this value too high.
-
Page 42: Camera Title Edit Screen
MENU SETTING CAMERA SETTINGS screen (continued) CAMERA TITLE EDIT screen Up to 24 characters can be entered for the camera title. The en- tered camera title will appear on the bottom left of the screen when the CAMERA TITLE menu item is set to ON. —... - Page 43 Allowed characters 8 direction (SELECTOR button) t direction Space Pressing the SELECTOR button in the t direction will select the character on the right and pressing in the 8 direction will select the character on the left. Pressing and holding the button will continuously change the character selected.
-
Page 44: Factory Settings Screen
MENU SETTING FACTORY SETTINGS screen Returns set values to their factory settings. — — — — — — ME N U F OC U S A D J U S T . . V I D E O A D J U S T . . C AM E R A S E T T N G S... -
Page 45: Others Troubleshooting
OTHERS Troubleshooting Symptom The operation becomes un- stable The auto iris will not operate There is noise in the screen or increase in residual images The colors of the screen are not natural White balance adjusted automatically/manually cannot be used The camera title will not ap- pear The vertical phase cannot be... -
Page 46: Speifications
OTHERS Speifications Image pickup device Number of effective pixeis Synchronizaton method Scanning frequency Resolution VIDEO OUT Video S/N ratio Minimum required illumination : 2.5 lx (50%, F1.2, AGC SUPER, Lens mount Power supply Power consumption Ambient temperature Mass Accessory Design and specifications are subject to change without notice. : 1/3 type WDR digital image device : 380,000 pixels ((H) 720 ×... - Page 47 External Dimensions (Unit: mm) U1-32 COLOR VIDEO CAMERA TRIPOD BASE 1/4-20UNC MOUNTING HOLE...
- Page 48 VICTOR COMPANY OF JAPAN, LIMITED is a registered trademark owned by VICTOR COMPANY OF JAPAN, LTD. is a registered trademark in Japan, the U.S.A., the U.K. and other countries. Printed in Japan © 2004 VICTOR COMPANY OF JAPAN, LIMITED LWT0127-001A...