Wireless Remote Controller; Program Timer - Fujitsu ASU9RLS2 Design & Technical Manual

2.

WIRELESS REMOTE CONTROLLER

FEATURES
„ „
Built-in timers
z „
Select from Three different timer programs (Weekly / Program / Sleep).
Weekly timer
z „
Weekly timer can be easily set by wireless remote controller.
ON, OFF can be set up to 4 times in 1 day and up to 28 times in 1 week.

Program timer

z „
The program timer operates the on and off timer once within a 24 hour period.
Sleep timer
z „
The sleep timer function automatically corrects the temperature thermostat setting according to
the timer setting to prevent excessive cooling and heating while sleeping.
Cooling operation/dry operation
When the sleep timer is set, the set temperature
automatically rises 2°F (1°C) every hour. The set
temperature can rise up to a maximum of 4°F (2°C).
Timer setting
60min.
2°F (1°C)
Simple function setting
z „
Setting of the air conditioner selection function is performed by remote controller.
Switching remote controller signal code
z „
Mixed-up
I.U. I.U. I.U. I.U.
Code selector switch eliminates unit
•
„
being wrongly switched.
(Up to 4 codes can be set.)
*I.U.=Indoor unit
3 Mode timer setup
¾ „
(Weekly / Program / Sleep) are possible.
Easy operation.
¾ „
Easy to change signal code (4 patterns) by button operation.
¾ „
4°F (2°C)
After code change
A B C D
I.U. I.U. I.U. I.U.
A B C D
- (01 - 03) -
Heating operation
When the sleep timer is set, the set temperature
automatically drops 2°F (1°C) every 30 minutes. The
set temperature can drop to a maximum of 8°F (4°C).
2°F
(1°C)
4°F
(2°C)
30min.
60min.
90min.
Timer setting
6°F
8°F
(3°C)
(4°C)