Table of Contents
Advertisement
CONNECTION/INSTALLATION
Installing the ferrite core
To retain electromagnetic compatibility, use the ferrite cores provided when connecting to
the lens.
Notes:
• Install the ferrite cores within 50 mm of the camera-side connectors. (Fasten the ferrite
core with the wire clamp provided.)
• If the LENS cable is short, please connect the cable to the camera without winding the
cable around the ferrite core.
Connections on the back
Power supply (DC 12 V or AC 24 V)
+
-
1
2
SYNC IN
VIDEO OUT
POWER
E-16
IRIS
VIDEO
DC
+
-
+
-
AUX
GND
TX
TX
RX
RX
B
A
C
D
Y/C OUT
SEE INST-
RUCTION
MANUAL
Wind once
Ferrite core
Wire clamp
Connect the DC 12 V or the AC 24 V power
supply to the DC 12V/AC 24V terminals. To
prevent connection errors or a cable
disconnection, we recommend the use of lug
plates for the connections.
The following table shows the connection
distances and connection cables provided
that 2-conductor VVF cables (vinyl-insulated
vinyl sheath cables) are used.
Maximum extension
(reference)
Conductor
diameter
Video-iris lens
(or galvanometnc-iris lens)
100 m 260 m 410 m 500 m
1.0∅mm 1.6∅mm 2.0∅mm 2.6∅mm
and more and more and more and more
Advertisement
Table of Contents
