JVC KY-F550 Instruction Manual page 9

Part Names and Functions (continued)
Side
5
[MENU] Menu Button
Press this button for 1-2 seconds. Menu screen
will be output from the various output terminals.
Press the button for 1-2 seconds again to clear
the menu screen.
☞ Page 32 'Setting Procedures'
6
[SET] Set Button
When the menu screen is displayed, use it to
select a submenu or to confirm a selected item
or set value.
☞ Page 32 'Setting Procedures'
5 7 6
5 / BARS
1 2 3 4
MENU SET
∞ / AW
8
7
[5/BARS] Up/Colour Bars Button
8
[∞/AW] Down/Auto White button
When menu screen is displayed
Press these buttons to move between selection
items on the menu screen.
Use the [5] button to move upwards.
Use the [∞] button to move downwards.
Used for altering the set values when an item
is being selected.
When the menu screen is off
● Press the [AW] button to adjust the white
balance.
☞ Page 22 'White Balance Adjustment'
● Press the [AW] button for 1-2 seconds to
adjust the white shading.
☞ Page 24 'White Shading Adjustment'
● Press the [BARS] button to switch between
the colour bars output and camera image
output.
Use this button when adjusting the monitor
or when recording colour bars signal.
☞ Page 21 'External Monitor Adjustment'
E-9