Make Connections - JVC GR-DVX48A Instructions Manual

Jvc digital video camera instructions
Hide thumbs Also See for GR-DVX48A:
Table of Contents

Advertisement

70
EN
To JLIP***
or EDIT***
Connector cover**
To AV IN/OUT****
or AV OUT****
Audio/Video
cable
(provided)
Editing
cable
(provided)
To AUDIO,
VIDEO* and
S-VIDEO IN
connectors
To Remote
PAUSE or
R.A.EDIT
To PAUSE IN
DISPLAY
*
Connect when an S-Video cable is not used.
**
When connecting cables, open this cover.
*** EDIT: GR-DVX78
JLIP: GR-DVX49/DVX48
**** AV IN/OUT: GR-DVX78
AV OUT: GR-DVX49/DVX48
For GR-DVX49/DVX48 Owners:
ATTENTION FOR EDITING CABLE
Make sure you connect the plug which has
3 rings around the pin to the camcorder.
USING THE REMOTE CONTROL UNIT
To S-VIDEO
S-Video
cable
(optional)
VCR
TV

MAKE CONNECTIONS

Also refer to pg. 22 and 23.
1
A JVC VCR equipped with a Remote PAUSE
connector . . .
... connect the editing cable to the Remote
PAUSE connector.
A JVC VCR not equipped with a Remote
PAUSE connector but equipped with an R.A.
EDIT connector . . .
... connect the editing cable to the R.A.EDIT
connector.
A VCR other than above . . .
... connect the editing cable to the remote
control's PAUSE IN connector.
2
Insert a recorded tape into the camcorder. Set the
VIDEO/DSC Switch to "VIDEO" (GR-DVX78 only),
then set the Power Switch to "
down the Lock Button located on the switch.
3
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR's instructions).
NOTES:
Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If they
do, they will be recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
Menu Screen (
•Time Code
.... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen (
pg. 42, 43).
•Playback Sound Mode, Tape Speed And Tape Running
Displays
.... set "ON SCREEN" to "LCD" or "LCD/TV" in the
Menu Screen (
the remote control.
For GR-DVX78 Owners: Make sure to set "S/AV INPUT"
to "OFF" in the Menu Screen (
When editing on a VCR equipped with a DV input
connector, an optional DV cable can be connected
instead of an S-Video cable and audio/video cable.
" while pressing
pg. 42, 43).
pg. 42, 43). Or, press DISPLAY on
pg. 42).
(cont.)

Advertisement

Table of Contents
loading

Table of Contents