Advertisement
Installation Manual
LAMP LOCK FEATURE
Luminaire ends are equipped with a sliding lamp-lock clip. The clip mates with a slot in the lamp base. The lamp
can only be removed from the luminaire if the clip is disengaged.
Step No. 1:
The lamp-lock clip slides forwards and backwards
Step No. 2:
With the clip in its unlocked position, the lamp is inserted
into the lampholder.
Step No. 3:
With the lamp properly installed, the clip is moved into its
final locked position.
Step No. 4:
Final position of lamp-lock clip (typical for both lamp
ends) Lamp cannot be removed from lampholders unless
clip is slid to its unlocked position.
FCLS-Slim Manual 8-11
8020 Queenair Drive, Gaithersburg, MD 20879 USA • phone: 301 921 4120 • fax: 301 963 3050
email: info@CathodeLightingSystems.com • website: www.CathodeLightingSystems.com
Page 8
©2011 Cathode Lighting Systems Inc.
Advertisement
