Advertisement
Installation Manual
MOUNTING THE LUMINAIRE
WARNING: ALL CIRCUITS MUST BE DE-ENERGIZED DURING THE INSTALLATION OF THIS PRODUCT
Step No. 1:
After removing the luminaire has been removed from its factory packaging and quick connect terminals have
been pulled from within the luminaire to the outside, luminaire may be arranged on the mounting surface, using the
lamp as a guideline.
Step No. 2:
Carefully install the lamp into the luminaire, making sure lamp contacts are fully seated in the lampholders and the
middle section of the lamp is snapped into the lamp-support clip.
FCLS-Slim Manual 8-11
Lamp-support clip
8020 Queenair Drive, Gaithersburg, MD 20879 USA • phone: 301 921 4120 • fax: 301 963 3050
email: info@CathodeLightingSystems.com • website: www.CathodeLightingSystems.com
Page 6
©2011 Cathode Lighting Systems Inc.
Advertisement
