Insert Editing - JVC GR-DV1 Instructions Manual

60

Insert Editing

You can insert snapshots and other scenes in previously recorded footage.
12:34
1 FIND EDIT OUT POINT
Confirm the time code at this point.
( pg. 49)
2
FIND EDIT IN POINT
Press REW until the point is located, then press
PAUSE.
3 PREPARE FOR INSERT EDITING
Press and hold INSERT on the remote control,
then press PAUSE. "6w" and the Time Code
(min.:sec.) appear in the viewfinder.
NOTE:
To see the on-screen characters on a connected
TV, press DISPLAY on the remote control.
( pg. 52)
6w
T
RM-V708U (provided)
4
5
6
NOTES:
EDITING (Cont.)
POWER DIAL
REMOTE SENSOR
RECORDING START/STOP
BUTTON
W
DISPLAY BUTTON
INSERT BUTTON
PLAY BUTTON
PAUSE BUTTON
REW(IND) BUTTON
START RECORDING
Press RECORDING START/STOP to begin
editing.
•Confirm the insert at the time code you
checked in step 1.
PAUSE DURING EDITING
Press RECORDING START/STOP. Press again
to resume editing.
STOP EDITING
Press RECORDING START/STOP, then press
STOP.
When performing Insert Editing, the tape's Video
Area and Sub-Code Area (
so the date and time information changes.
If you perform Insert Editing onto a blank space
on the tape, the audio and video may be
disrupted. Make sure you only edit recorded
areas.
pg. 7) are rewritten,