Access The Computer's Pci Local Bus Expansion Slots - Allen-Bradley 1784-PCIC Installation Instructions Manual

To install the card, you need to:
• access the computer's expansion slots.
• insert the card into the computer.
IMPORTANT

Access the Computer's PCI Local Bus Expansion Slots

To install the card, you must access the computer's PCI local bus expansion slots.
Follow these general steps, or refer to your computer's user guide for further
instructions.
1. Shut down the host computer.
2. Remove the computer's cover.
3. Select a vacant PCI local bus expansion slot.
4. Loosen the screw (if present) on the back (rear bracket) of the computer.
5. Remove the slot's expansion cover.
Install the 1784-PCIC or 1784-PCICS Communication Interface Card
The card's dimensions are shown below.
6.5 in.
16.5 cm
Publication 1784-IN003D-EN-P - January 2006
4.2 in.
10.7 cm
31474-M
1-5