Interpret the LED Indicators
The LED indicators on the card give you information about the card and the
network when you're connected via the BNC connectors. Table 6.1 outlines the
states and explains what each state means to you and the action you should take, if
any, to correct that state.
Diagnostic Status
Indicators
Redundant Media
BNC Connectors
IMPORTANT
!
A
!
B
!
When you connect the module to a ControlNet network using
only the Network Acces Port (NAP), the LEDs are meaningless.
42281
Publication 1784-IN003D-EN-P - January 2006
6
Chapter