Troubleshooting - Samsung SGH-t409 Series User Manual

Portable tri-band mobile phone
Hide thumbs Also See for SGH-t409 Series:
Table of Contents

Advertisement

Press the Down key to highlight the Connection Setting option. Press the
11.
Left or Right key to set to Automatically Connect, Don't Automatically
Connect, or Ask Before Connecting.
Press the Down key to highlight the Non-Broadcast SSID option. Press
12.
the
key to place a checkmark in this box if your router does NOT
broadcast its SSID. In general, the default setting for most routers will
broadcast the SSID.
Press the Down key to highlight the Inter AP handovers option. Press the
13.
key to place a checkmark in this box if you can connect to multiple
Wi-Fi access points (AP) and would like your phone to switch automatically
(while on a call) when leaving one Wi-Fi zone and entering another nearby
Wi-Fi zone.
Press the Down key to highlight the IP setting option. Press the Left or
14.
Right key to set to Dynamic or Static. Dynamic is the standard and
recommended setting.
If you select
address
are using a T-Mobile Router, copy the information regarding the Subnet
Mask, DSN Server, and Gateway from your router into your phone. The IP
address you input must be different from the one you use to access the
router. If you are connected to a Wi-Fi network that requires Static IP
addresses (usually in a corporate environment), please see your System
Administrator to get the required information.
When finished, press the Save soft key.
15.

Troubleshooting

This section provides resources for determining solutions to problems or issues that
may occur with your T-Mobile Wi-Fi compatible phone.
T-Mobile Wi-Fi Help
Use the following steps to select the Wi-Fi Help option from the Wi-Fi menu and get
specific Wi-Fi assistance.:
In Idle mode, press the Menu soft key to access Menu mode.
1.
Using the Navigation keys, scroll to Settings. Press the Select soft key to
2.
enter the menu.
Highlight the Wi-Fi option and press the Select soft key.
3.
Highlight the Wi-Fi Help option and press the Select soft key.
4.
29
Static
in this step, press the
option. Press the
Down
key to highlight the
key to enter the IP address menu. If you
IP

Advertisement

Table of Contents
loading

Table of Contents