Getting Started; Safety Precautions - Wolf cinema SDC-10 User Manual

SDC-10

Getting Started

Safety Precautions

IMPORTANT INFORMATION
This product has a High Intensity Discharge (HID) lamp that contains mercury. Disposal of these materials may be regulated in
your community due to environmental considerations. For disposal or recycling information, please contact your local authorities
or for USA, the Electronic Industries Alliance: http://www.eiae.org.
WARNING! TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
WARNING! THIS APPARATUS MUST BE GROUNDED.
CAUTION: To reduce the risk of electric shock, do not remove cover. Refer servicing to qualified service personnel.
This projector is equipped with a 3-blade grounding type plug to satisfy FCC rule. If you are unable to insert the plug into the
outlet, contact your electrician.
About the Installation Place
Do not install the projector in a place that cannot support its weight securely. If the installation place is not sturdy enough, the
projector could fall or overturn, possibly causing personal injury.
IMPORTANT SAFEGUARDS
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal
safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards
incorporated into this product, observe the following basic rules for its installation, use and service. Please read these Important
Safeguards carefully before use.
– All the safety and operating instructions should be read before the product is operated.
– The safety and operating instructions should be retained for future reference.
– All warnings on the product and in the operating instructions should be adhered to.
– All operating instructions should be followed.
– Place the projector near a wall outlet where the plug can be easily unplugged.
– Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
– Do not use attachments not recommended by the product manufacturer as they may be hazardous.
– Do not use this product near water. Do not use immediately after moving from a low temperature to high temperature, as this
causes condensation, which may result in fire, electric shock, or other hazards.
– Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult,
and serious damage to the product. The product should be mounted according to the manufacturer's instructions, and should
use a mount asrecommended by the manufacturer.
– When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces which
may cause the product and cart to overturn, damaging equipment or causing possible injury to the operator.
8
1080p D-IL A ® 3D Front Projector User's Manual