Panasonic DP-C406 Operating Instructions Manual page 93

4
Select "04 LDAP".
5
Select "00 LDAP Server".
6
Enter the LDAP Server Name (up to
60 characters), or LDAP Server IP
Address and then select "OK".
1
When "01 General (03 DNS)" in the
Network Settings is set to "Yes", enter the
LDAP Server Name.
When "01 General (03 DNS)" in the
Network Settings is set to "No", enter the
LDAP Server IP Address.
7
2
Select the authentication method, and
then select "OK".
1
None Authentication is not required.
NTLM Selects NTLM.
Clr Text Selects CLEAR TEXT.
Kerberos Selects Kerberos.
To select "Kerberos" for the authentication
method, set "01 General (03 DNS)" to "Yes"
in Function Parameters (Network Settings >
Key Operator Mode).
When "None" or "Clr Text"is selected
Select "Off" or "On", and then select "OK".
1
When "NTLM" is selected
Enter the NT domain name (NetBIOS name),
and then select "OK". (Up to 15 characters)
1
2
2
2
93