No.
Parameter
28
Stamp at Memory XMT
31
Incomplete File Save
33
XMT Reduction
37
Receive to Memory
48
Comments
Set whether to stamp the originals when storing
them into memory.
• Invalid
Originals are not stamped.
• Valid
Originals are stamped.
(Depending on the Stamp setting on the
Control Panel)
Set whether the machine retains the document
in memory if the document is not successfully
transmitted.
• Invalid
A failed file is not saved.
• Valid
A failed file is saved and retransmitted as
required.
For details about retransmission, refer to
Resending an Incomplete Document in the
Operating Instructions (For Facsimile and
Internet Fax) of provided CD-ROM.
Enable or disable Reduced transmission.
• Invalid
No original is reduced for transmission.
• Valid
When transmitting original wider than the
recording paper used at the receiving
machine, the machine performs reduction.
Set the 8-digit password for printing a memory-
received original.
If "Receive to Memory" in "More Menus" is
"On", this setting cannot be selected.
Refer to Example : Receive to Memory (see
page 60).
Selective Item
Standard
Setting
Invalid, Valid
Valid
Invalid, Valid
Invalid
Invalid, Valid
Valid