Table of Contents
Advertisement
Cleaning Up a Recording Medium
Writing speed of recording media tends to become slow after long period of repeated use.
To regain the speed, execute cleanup periodically.
NOTE:
Make sure to use the provided AC adapter for the power supply when cleaning up a
recording medium.
Set the power switch to
If the AC adapter is not connected to the camera, a warning message appears. In this
case, connect the AC adapter.
Press MENU. The menu appears.
Press
to select [
Press
to select [
Press
to select [CF SLOT] or [SD SLOT], then press
CF SLOT : CF card
SD SLOT: SD card
Press
to select [EXECUTE], then press
To cancel clean up, select [CANCEL], then press
When clean up is finished, [CLEANING UP COMPLETED] appears. Press
complete the operation.
It may take for a while until cleanup is completed.
CAUTION:
Do not remove the recording medium or perform any other operation (such as turning off
the power) during cleanup.
or
.
MEMORY CARD SETTING], then press
CLEAN UP], then press
MODE:
.
.
.
.
/
/
.
to
Advertisement
Table of Contents
