General - Panasonic CQ-RXBT490W Operating Instructions Manual

General

Caution
Set the volume level to low enough before the AUX connection is completed.
Failure to observe this may generate loud noise and accordingly damage your speakers and your hear-
ing.
[SOURCE]
selects a source. selects a source.
[PWR] (Power) (Power)
toggles power on/off. toggles power on/off.
[VOL] (Volume)
Remote Control Sensor
Power On/Off
Set your car's ignition switch to the ACC or ON posi-
tion.
Power on: Press [ SOURCE ] (PWR).
Power off: Hold down [ SOURCE ] (PWR) for more
than 1 second.
Source Selection
Press [SOURCE] to change the source.
d
d
d
The sound of connected audio device can be output
from car speakers.
d
[MENU]
selects items in the
other menu.
(a page 13)
Radio
Disc player
(only for CQ-RXBT490W)
(a page 14)
USB (a page 17)
AUX
AUX Connector (3.5 mm ø stereo)
From line output of external sound/audio device
(ex. Silicon audio player, HDD player, etc.)
d
(Return to "RADIO")
Volume Adjustment
(Setting Range: 0 to 40, Default: 18)
Turn [VOL] clockwise to increase the volume,
and counterclockwise to decrease the volume.
CQ-RXBT490W/CR-LXBT490W
Bluetooth
®
(a page 24)
Volume level (0 to 40)
(default: 18)
9