Downloading The Data To Vcr - JVC InteriArt HV-36P38SJE Instructions Manual

• If you have any questions about the items
in the Broadcast Selection menu or how to
operate the menu, please contact your
cable TV station.
• If you don't want to use the ACI function,
press the 6 buttons to choose ACI
SKIP and then press a.
• When the cable TV broadcast reception is
poor, the ACI function will not work
properly.
• If there is an error in the ACI data itself,
the TV channel cannot be registered
properly. If this happens, turn the ACI
function off (ACI SKIP) and use the
AUTO PROGRAM function.
Alternatively, use the EDIT/MANUAL
function to correct the Programme
number (PR) setting.
If "ACI ERROR" is displayed in the
AUTO PROGRAM menu:
"ACI ERROR" means that the ACI function
is not working properly. Press the 2 button
to start the ACI function again.
If "ACI ERROR" still appears even after you
have tried to start the ACI function several
times, press the 3 button to start the AUTO
PROGRAM function. It does not cause any
problem because all the TV channels are
registered to the Programme numbers (PR)
by the AUTO PROGRAM function.

Downloading the data to VCR

You can transmit to the latest Programme
numbers (PR) data to a VCR with the T-V
LINK function.
Caution
• This only works when a T-V LINK
compatible VCR is connected to the
EXT-2 terminal.
• This only works when the T-V LINK
menu is being displayed.
T-V LINK
DOWNLOAD TV VCR
OK
EXIT
D0005-EN
1 Turn on the VCR
2 Press the a a a button a
The data transmission begins.
DOWNLOAD TV VCR
TRANSFER. . . . .
D0037-EN
The T-V LINK menu disappears once the
data transmission ends.
When the T-V LINK menu is
changed over to another menu:
The TV has finished its menu. This new
menu is operated from the VCR. See the
VCR instruction manual for what to do
next.
If "FEATURE NOT AVAILABLE"
appears at the T-V LINK menu:
Check the following three items. Then
press the 2 2 2 2 button to retry data
transmission.
• Has a T-V LINK compatible VCR
been connected to the EXT-2
terminal?
• Has the VCR power been turned on?
• Does the SCART cable that is
connected to the EXT-2 terminal to T-
V LINK compatible VCR have all its
proper connections?
Setting up your TV
11