Operation; Selecting A Computer - ADDER CCS-PRO User Manual

Operation

SELECTING A COMPUTER

There are six ways to switch the common peripherals to specific computer channels:
• Using the innovative Free-Flow automatic switching utility
• Using the control panel Ü
• Using hotkeys
• Using mouse button presses
• Remote control via an external system
• Using the optional RC4 remote control
Selecting a computer using the Free-Flow utility
Once configured, Free-Flow allows you to change channels merely by moving the mouse
to edge of one screen towards the next screen. As the mouse pointer reaches the edge
it will cause the channel to automatically change and will jump to the next screen.
Notes:
• Free-Flow cannot be enabled until a layout has been configured and downloaded to the CCS-
PRO4 switch - see Free-Flow configuration.
• The mouse will not flow across the screens while any mouse buttons are pressed down - this
prevents undesired behaviour when dragging windows around or group-selecting items.
• You can determine which peripherals will be switched by Free-Flow independently of those
that would be switched with any other method. See
settings section.
• You can continue to use any of the other channel switching methods while Free-Flow is
enabled.
The four upper indicators on the CCS-PRO4 display panel will scroll across every few
seconds to show that Free-Flow is enabled. See
to the utility or Free-Flow configuration
operation.
You can temporarily disable (and re-enable) Free-Flow using hotkey presses:
• Simultaneously press and hold and
Þ
Switch Mode within the Switch...
What is Free-Flow? for an introduction
for more details about how to prepare it for
, then press
Selecting a computer using the control panel
The control panel allows you to determine how the various peripherals are switched to
one or more computer channels.
Indicates the number
of the currently
selected computer
Use this button to
choose the next
required computer
The lower four indicators will
intermittently scroll across
whenever Free-Flow is enabled.
1 Optional: If you need to selectively switch some of your peripherals, press the MODE
button repeatedly to change the switching mode:
K/M SPK USB1 USB2
Will switch all peripherals together
MODE
Will switch keyboard, mouse and speakers
MODE
Will switch only the keyboard and mouse
MODE
Will switch only the speakers
MODE
Will switch only USB peripheral 1
MODE
Will switch only USB peripheral 2

Notes:
• If an indicator flashes, it signifies that the respective peripheral is currently switched to
another computer channel.
• The peripherals to be switched using the Free-Flow method are set independently.
2 Press the COMPUTER button repeatedly to select the required computer channel.
The upper K/M, SPK, USB1, and USB2 indicators show which
peripherals are switched to the current computer channel OR (as
you begin pressing the MODE button) the peripherals that will be
switched during the next press(es) of the COMPUTER button.
Use this button
to choose which
peripherals will
be switched
27