Features Menu; Sleep Timer; Child Lock - JVC HV-36P38SUE, HV-32P37SUE, HV-28P37SUE Instructions Manual

FEATURES menu

FEATURES

SLEEP TIMER

CHILD LOCK

APPEARANCE
BLUE BACK
OK
D0023-EN
SLEEP TIMER
You can set the TV to automatically turn off
after a specified period of time.
1 Choose SLEEP TIMER. Then press
the a a or 3 3 3 3 button
a a
A Sub-menu of the SLEEP TIMER
function appears.
> SLEEP TIMER
0
OFF
OK
D0024-EN
2 Press the 5 5 buttons to set the
5 5
period of time.
Then press the a
You can set the period of time a
maximum of 120 minutes (2 hours) in 10
minute increments.
• One minute before the SLEEP TIMER
function turns off the TV, "GOOD
NIGHT!" appears.
• The SLEEP TIMER function cannot
be used to turn off the TV's main
power.
• When the SLEEP TIMER function is
on, you can display the Sub-menu of
the SLEEP TIMER function again to
confirm and/or change the remaining
period of time of the SLEEP TIMER
function. Press the a button to exit
the menu after confirming and / or
changing the remaining time.
TYPE A
ON
120
a button
a a
To cancel the SLEEP TIMER
function:
Press the 2 button to set a period of time
to "OFF".
CHILD LOCK
When there is a TV channel you wish your
children not to watch, you can use the
CHILD LOCK function to lock out the TV
channel. Even when a child chooses a
Programme number (PR) in which a locked
TV channel has been registered, the screen
will change to blue and displays n (CHILD
LOCK) so the TV channel cannot be viewed.
Unless you enter a pre-set ID number by a
special operation, the lock cannot be released
and the child cannot view the TV channel
programmes.
To set the CHILD LOCK function
1 Choose CHILD LOCK, then press
the 0 0 0 0 button
"SET ID NO." (ID number setting screen)
appears.
>> SET ID NO.
0 040
OK
D0025-EN
2 Set the ID number to your liking
1 Press the 6 6 buttons to choose
6 6
a number.
2 Press the 5 5 buttons to move
5 5
the cursor.
29